About this 3D model

"Comrade kiss - Bruderkuss" "My God, help me to survive this deadly love" is written in German on this famous Wallart at the Berlin border, Stralauer Allee. Left side: Leonid Brezhnev (Leader of the USSR), right side: Erich Honecker (Leader of the GDR) They met on October 7, 1979 If you like to scale, do it only with x and y axis, do not change z axis! Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Wallgenerator is set to “ Arachne ” for better results, if your CPU is slow, change it to " Classic " For better results you can use a 0.2mm noozle, just leave all other settings as they are. Filaments Used: PETG BambuLab Basic Black Transmission Distance: 0.3 PETG BambuLab Basic Blue Gray Transmission Distance: 2.7 PETG BambuLab Basic Gray Transmission Distance: 3 PETG BambuLab Basic Nature Transmission Distance: 8 Swap Instructions: if you don't have ams just put pause on specified layers and swap filament manually Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #13 (1.12mm) swap to Gray At layer #19 (1.6mm) swap to Nature for the rest. If you wanna use PLA: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Grey Transmission Distance: 3.0 PLA BambuLab Basic Grey Transmission Distance: 2.0 PLA BambuLab Basic Beige Transmission Distance: 8.0 Just leave all other settings as they are. I wish you always a clean nozzle!