About this 3D model

USS Independence was a wooden-hulled, three-masted ship, originally a ship of the line and the first to be commissioned by the United States Navy Originally a 90-gun ship, in 1836 she was cut down by one deck and re-rated as a 54-gun frigate. If you like to scale, do it only with x and y axis, do not change z axis! Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Wallgenerator is set to “ Classic ” for better results slice with " Arachne " You can use a 0.2mm noozle, just leave all other settings as they are. Filaments Used: PETG BambuLab Basic Black Transmission Distance: 0.3 PETG BambuLab Basic Blue Transmission Distance: 2.5 PETG BambuLab Basic Lake Blue Transmission Distance: 4 PETG BambuLab Basic Nature Transmission Distance: 8 Swap Instructions: if you don't have ams just put pause on specified layers and swap filament manually Start with Black At layer #10 (0.88mm) swap to Blue At layer #14 (1.2mm) swap to Lake Blue At layer #18 (1.52mm) swap to Nature for the rest. If you wanna use PLA: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 2.0 PLA BambuLab Basic Blue Transmission Distance: 4.0 PLA BambuLab Basic Beige Transmission Distance: 8.0 Just leave all other settings as they are. I wish you always a clean nozzle!