About this 3D model
This wizard was inspired by my love for Gandalf and the timeless magic of light guiding through darkness. The model is designed to print in multiple separate pieces — allowing faster prints, easier painting, and multi-color results without needing a multi-color printer. The wizard’s staff is built to hold an LED tea light or RGB puck light, casting a mystical glow through the gemstone at its tip. ?♂️ Model DetailsPrints in several separate parts to speed up printing and allow multi-color assembly The staff is designed to hold: LED Tea Light Candle: [https://a.co/d/edgb6Xs] RGB Puck Light: [https://a.co/d/dZVWg0A] The gemstone fits into the staff in one specific orientation Tested gemstone materials: Basic White PLA – best diffusion Translucent PLA – brighter, sharper light Requires 100% scale print for the listed lights to fit properly Needs a 250mm x 250mm build plate for full-size compatibility You can use a smaller printer build plate, but you may need to shop around for a smaller LED light, or simply use a silk filament for the gemstone if you don’t need it to glow Walls: 3 Infill: 5% Gyroid Supports: Tree supports (remove small overhangs only) Layer Height: 0.2 mm recommended Nozzle: 0.4 mm Filament Type: PLA Bed Adhesion: Skirt or brim recommended ? Filament UsedBox: Bambu Lab Basic Black – [https://us.store.bambulab.com/products/pla-basic-filament?variant=564681938135969812] Uses 346g of filament Can be printed with 2 walls or lightning infill to reduce material usage Hat: Flashforge Matte Grey – [https://a.co/d/fqGdJOA] Uses 97g of filament Head: 3DHoJor Matte Light Khaki – [https://a.co/d/iGC2uU2] Uses 287g of filament Staff: Bambu Lab Matte Brown – [https://us.store.bambulab.com/products/pla-matte?id=41884208529544] Uses 28g of filament Gemstone: Bambu Lab Basic Jade White – [https://us.store.bambulab.com/products/pla-basic-filament?id=40475106640008] Uses 5g of filament Additional Notes: I used a variety of matte filaments for a natural, aged look ? Recommended Build VolumeMinimum: 250mm x 250mm x 250mm Total Filament Usage: ~763g at full size (with standard infill and supports) Happy Printing!Christian, @CraftyKid3D