About this 3D model

填充100%层高0.04首层0.16. 如果遇到警告请打开如图： Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm。 If you encounter a warning, please open it as shown in the picture: Filaments Used: 红（red） Transmission Distance: 2.5 黑 （black）Transmission Distance: 0.3 紫 （ purple ）Transmission Distance: 1 黄 （yellow）Transmission Distance: 6 Swap Instructions: Start with 红 At layer #11 (0.56mm) swap to 黑（black） At layer #13 (0.64mm) swap to 紫（ purple) At layer #15 (0.72mm) swap to 黄（yellow） for the rest.