About this 3D model

Jogis Bottle Holder! Originally I wanted to create a holder for my syrups for the soda maker. During construction, it turned out that other bottles fit perfectly as well! Instead of just in the kitchen, the part is therefore also suitable in the living room, in the dining room, in the party room - everywhere bottles need to be held. This is such an object "You don't need it, but it looks cool". Reduces the "tendency to fall over" of the bottle! Inner diameter of the holder: 72mm, EU beer bottles have 70mm, so they probably fit too (I don't have any beer). 18.3.2024 Update: 3 beer bottles 0.5l tested - works perfectly - see photo! The printing filament is irrelevant. Outdoors perhaps better PETG, indoors PLA is sufficient. The pattern in the photo has black feet made of PLA, the silver objects are SILK-PLA and because I didn't have anything else in gray, the cups are made of PETG. Design refinement: The cups overlap with the crossbars and are open inside (in case something drips) Everything is just plugged in and holds (Printed on X1Carbon) I would glue the feet and the silver parts, the cups are sufficient plugged in. You have a yacht, a camper? Then take suction cups (for 6mm holes) and you have a cool bottle holder for the camper van, for rough seas and bumpy terrain! So: 3 syrup bottles for a soda maker? Or rather 3 beers? 3 beers for 3 friends or for one alone next to the sofa? Your decision! The print profiles are set to SLOW, of course it can also be printed faster. The part in the photos is without post-processing directly from the printer, just plugged together. ============ Holder for 3 Bottles (Soda-Syrup, Coke, Beer) with maximum 72mm Easy print, use PLA, PETG or whatever you want. Hold my beer! ============ Note: My bottle holder in rocket design: https://makerworld.com/en/models/373165#profileId-273166 Or the pen holder from the same design line: https://makerworld.com/en/models/379610#profileId-279728 Boost Me Boost me, so I can use other bottles for the bottle holder :-)