About this 3D model
This is a remix of the original Model by 3Dimensions on Printables optimiced for Bambu Lab. Boost Me Ich you like the Model please boost me! Features: Fix your cables with zip ties : Clip different WAGO Inserts in a rail: To mount the Wago inserts, they are clipped onto the rail. The Wago terminals can also be clipped in before or afterwards. Add various cable glands and accessories: Inserts: WAGO 2273-202 WAGO 2273-203 WAGO 2273-204 WAGO 2273-205 WAGO 221-412 WAGO 221-413 WAGO 221-415 Choose your lid: Lid 80x60, with screws Lid 80x80, with screws Lid 120x80, with screws Lid 120x120, with screws Lid 80x60, clip on Lid 80x80, clip on Lid 120x80, clip on Lid 120x120, clip on Example: Lid 80x60, with screws Example: Lid 80x60, clip on Box Variants 80x80: Breakouts M12 x 1.5 M16 x 1.5 M12x1.5 zip ties M16x1.5 zip ties Rail for inserts Note 1 NO only box 2 8x NO 3 8x NO 4 8x NO 5 8x NO 6 8x NO 7 4x 4x NO different Positions 8 4x 4x NO 9 4x 4x NO 10 4x 4x NO 11 6x 4x YES 12 6x 4x YES 13 6x 4x YES 14 6x 4x YES 15 6x 2x 2x YES Box Variants 120x80: Breakouts M12 x 1.5 M16 x 1.5 M12x1.5 zip ties M16x1.5 zip ties Rail for inserts Note 1 NO only box 2 10x NO 3 10x NO 4 10x NO 5 10x NO 6 10x NO 7 4x 6x NO different Positions 8 4x 6x NO 9 4x 6x NO 10 4x 6x NO 11 6x 4x YES 12 6x 4x YES 13 6x 4x YES 14 6x 4x YES 15 6x 2x 2x YES Box Variants 80x60: Breakouts M12 x 1.5 M16 x 1.5 M12x1.5 zip ties M16x1.5 zip ties Rail for inserts Note 1 NO only box 6x NO 3 6x NO 4 6x NO 5 6x NO 6 6x NO 7 2x 4x NO 8 2x 4x NO 9 4x 2x NO 10 4x 2x NO 11 4x 2x YES 12 4x 2x YES 13 4x 2x YES 14 4x 2x YES Box Variants 120x120: Breakouts M12 x 1.5 M16 x 1.5 M12x1.5 zip ties M16x1.5 zip ties Rail for inserts Note 1 NO only box 2 12x NO 3 12x NO 4 12x NO 5 12x NO 6 12x NO 7 4x 8x NO different Positions 8 8x 4x NO 9 4x 8x NO 10 8x 4x NO 11 6x 6x YES 12 6x 6x YES 2 rails 13 6x 6x YES 2 rails 14 6x 6x YES 2 rails 15 6x 2x 4x YES 2 rails 16 8x 4x YES 4 rails 17 8x 4x YES 4 rails Print Settings: See the different examples in download section, especially for orientation I used PETG, PLA will work too 0,2mm layer heigt 0,4mm nozzle 15% infill no supports needed Miscellaneous: Electrical work may only be carried out by trained electricians. Does not represent a certified junction box according to VDE or similar standards. Use at your own risk.