About this 3D model

Business Card Holder with own text - complete your desk Hi, I would like to introduce you to my business card holder . It is simple and easy to print and you don't need an AMS for it. Finalise your text and print out the plate, which you can then stick into the recess with double-sided adhesive tape. Create it with your own text. there is also a version without textfield in the print profile On the underside are small recesses to glue in rubber feet in the size of 8mm After you have printed, just press the inserts into the groove and your part is ready. If it's a bit more difficult, use pliers. I also had to do this with one or two parts, but it sits firmly and you don't need any glue If you have already printed one of my Phone Stands, you can now complete your desk with the Pen Holder and the Businesscard Holder Here you can find all Phone Stands https://makerworld.com/en/@TheBigGreek Here the Pen Holder https://makerworld.com/en/models/253471#profileId-269896 If you like my work/project consider supporting me with these options: leave a like leave a comment download the file or By me a Coffee This article/post/text or the print profile as well as the finished print may not be used for commercial purposes. Have fun printing TBG