About this 3D model

"Save Your Cans" US war poster between 1941~1945 If you like to scale, do it only with x and y axis, do not change z axis! Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Wallgenerator is set to “ Classic ” for better results slice with " Arachne " You can use a 0.2mm noozle, just leave all other settings as they are. Filaments Used: PETG Bambu Lab Basic Black Transmission Distance: 0.3 PETG BambuLab Basic Red Transmission Distance: 2.5 PETG BambuLab Basic Yellow Transmission Distance: 6 PETG BambuLab Basic Nature Transmission Distance: 8 Swap Instructions: if you don't have ams just put pause on specified layers and swap filament manually Start with Black At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #17 (1.44mm) swap to Nature for the rest. If you wanna use PLA: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Tough Vermillion Red Transmission Distance: 3.0 PLA BambuLab Basic Yellow Transmission Distance: 6.0 PLA BambuLab Basic Beige Transmission Distance: 8.0 Just leave all other settings as they are. I wish you always a clean nozzle