About this 3D model

~~This was the Commercial Bonus File for My Patreon Sept 2024~~ At the end of each month starting September there will be a Commercial Use file. This file is only available as Commercial use, and after the month it is released in closes, here and MMF store is the only way to get them. The Files included are:regular/6mm eye sockets STL and in 3MF MulticolorLayer Change eyes - Big round Pupil Eyes STL I'm hoping this will help slowly building up a person's collection of CU files, while also adding more value to subscribing to my Patreon. So first up for this new 'Collection' will be the S'mores Turtle ( shout out to Kelly for this one!) Print Settings: Print in Place No Supports needed 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray Big one in photos is scaled to 220%. Layer Printable eyes: Big Round Pupil Eyes They aren't as cool looking as glass eyes, but in a pinch, or needing a bulk amount these eyes will be available and quick to print! Because these are 6mm in size, they should fit on any of my models that has eye sockets. This means that you can also scale both the model and the eyes to different sizes. I have had success at 80% eyes (a little tight but they work!) and 220% size like the S'mores Turtle in the above pictures. The only thing to keep in mind is that if you scale massively higher the eye slot tolerance in the model might be more visible. Scaling the eyes themselves too small may cause the areas to layer change to merge. For 6mm eye (100% size) printing - layer change/ pause at: 0-1mm black 1-1.4mm Iris color 1.4mm - finish white If you change the scale, these will not be correct. Smaller layer heights may give better details, likely even a smaller nozzle, which I do not have one of to test. Filaments used: Single:isanmate rainbow sparkle gradient, Bambu black magenta and white. Multicolor: Bambu white, gold and brown