About this 3D model

Preventing the movement of nuts during installation is a significant help. This proves especially useful when assembling the Voron0, particularly for the Pocketwatch, TopHat, and Bed_Mount screws. Hardware: M3 Square Nuts from Aliexpress (5.5mm x 5.5mm x 2mm) (Recommended!) Alternatively, M3 Hex Nuts can be used. However, these are taller, making them harder to print as only one or two layers support the nut (depending on the frame). Despite this, they are still functional. The MakerBeam version has a lower profile compared to the LDO version. Print Settings: Layer Height: 0.2mm ----------------------- zen3d.eu