About this 3D model

These Pickle Balls have Eye Balls that print separately and snap onto the pickle ball body. The eye balls spin freely and rotate to allow the pickle to give different expressions and add an extra fidgety experience. I am thinking about creating other variations of these or a package and some accessories. These pickle balls measure roughly 1.45" when printed at 100% so if you scale them up to 200% they will be the same size as an official Pickle Ball. I have only printed them at 100% scale, so far. The Pickle Balls are printed with NO supports & NO Brim. However, I do use an outer brim for the Eye Balls. Please ensure you have proper bed adhesion for all of your models. I use a Textured Build Plate with Bambu Labs liquid glue. For all Bambu Studio users or anyone who can use a 3mf file I recommend using the attached 3mf file. For anyone who cannot use a 3mf file all of the stl files are located in the zip file attached. All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mm (Maximum) layer height. I use the 4 Color AMS system to print the models in color. FILAMENTS IN PHOTO ABOVE: Pickle Ball: Stronghero3D Summer Green pla - https://a.co/d/7GQ2mvd Update: This post now Include a Keychain version. I know I said there would be a magnet version too but unfortunately there is not. These balls are large and heavy so the magnets do not secure them well onto metallic surfaces. When you slice the file you will see the inner hole for an 8x3 magnet but the standard magnets I use are not strong enough to hold them. If you want to give it a shot with stronger magnets (N52) they may work and the hole is there. I removed the pause since I do not recommend the magnets with this model. Please let me know if you have any questions. Thank you! Mike