About this 3D model

I have had a lot of interest in turning the pickles into magnets so I included some magnet files to this Halloween collection, along with the standard keychains. If you print the magnet files there is a pause added into the slicer at layer 24, when printing at a 0.16mm layer height. Once the printer pauses, simple place (1) 8x3mm magnet into each hole and then press resume on the printer. The printer will print directly over top of the magnets concealing the magnets inside and turning the pickles into little magnets. The magnets can be purchased from Amazon... https://a.co/d/1bVKYKB For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file. For anyone who cannot use a 3mf file all of the stl files are located in the zip file attached. ALL of these designs are printed with NO supports & NO Brim. Please ensure you have proper bed adhesion for all of your models. I use a Textured Build Plate with Bambu Labs liquid glue. All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mmm (Maximum) layer height. I will use a 0.12mm layer height if I have the extra time for a nicer finish. I use the 4 Color AMS system to print the models in color. FILAMENTS IN PHOTO ABOVE: Zombie Pickle: Stronghero3D Autumn pla - https://a.co/d/ja4kxMf Witch Pickle: Stronghero3D Summer Green pla - https://a.co/d/1cEBJp7 I used a Silk White for the witches eyes to get that shine. FrankenPickle: Stronghero3D Summer Green pla - https://a.co/d/1cEBJp7 All other filaments not mentioned are standard solid pla filaments.