About this 3D model

If you are here for the pickles I think you are going to love these nuts! I don't know how such a tiny little peanut gave me so much trouble during the design phase but we learned together and have become best friends. Eventually I will be doing a package for these little nuts. I ended up prototyping this so many times and thinking I was done a few times running a plate and then making more adjustments I ended up using all my Sunlu Wood PLA so I will upload a photo later this week, once the filament arrives and I print a batch. If you want to make Magnets there is a pause added into the slicer at layer 24, when printing at a 0.16mm layer height. Once the printer pauses, simple place (1) 8x3mm magnet into each hole and then press resume on the printer. The printer will print directly over top of the magnets concealing the magnets inside and turning the nuts into little magnets. The magnets can be purchased from Amazon... https://a.co/d/1bVKYKB If you are planning on making the keychains, the ball and chains fit perfectly thru the little hole... https://a.co/d/c4BRqhH For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file as all the models are precolored. ALL of these designs are printed with NO supports & NO Brim. Please ensure you have proper bed adhesion for all of your models. I use a Textured Build Plate with Bambu Labs liquid glue. All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mmm (Maximum) layer height. I use the 4 Color AMS system to print the models in color. Filaments: Sunlu Wood PLA for the peanut body. Personally, I have been using a silk white for the eyes & teeth and a silk red for the tongue and I think it works really well with these little dudes. Basic Black PLA for eyes. Please let me know if you have any questions. Thank you! Mike