About this 3D model

If you are here for the pickles and you're also into aliens I think you will like this one. The zombie was my favorite pickle until I printed these little aliens, which strangely remind me of Jay Leno. The Alien Pickle was a suggestion from a Patron and the more I thought about it the more I had to do it and the shape was great practice and a segway for my next articulated purple veggie! Thank you for the suggestion! At some point this year I will start sending out surveys to vote on upcoming models. I want to get my supporters more involved and more in the know on upcoming models. __________________________________________________________________________ ALL of these designs are printed with NO supports & NO Brim. Please ensure you have proper bed adhesion for all of your models. I use a Textured Build Plate with Bambu Labs liquid glue. All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mmm layer height. I use the 4 Color AMS system to print the models in color. If you print the magnet files there is a pause added into the slicer at layer 23, when printing at a 0.16mm layer height. Once the printer pauses, simple place (1) 8x3mm magnet into each hole and then press resume on the printer. The printer will print directly over top of the magnets concealing the magnets inside and turning the pickles into little magnets. The magnets can be purchased from Amazon... https://a.co/d/1bVKYKB If you print the Keychain/Ornament version these little ball and chain keychains fits perfectly thru the hole... https://a.co/d/91ahEnS I used Stronghero3D Autumn pla - https://a.co/d/ja4kxMf for the pickles in the above photo. All other filaments not mentioned are standard solid pla filaments. Please let me know if you have any questions. Thank you! Mike