About this 3D model

This box is designed to store a set of up to seven dice and one ore multiple decks of cards. Moreover it functions as a dice tower. Cards compartment: The cards compartment measures 70x70x92mm, which means it can take most playing cards as well as sleeved cards. The download contains two different versions of the box, with one offering the option to display a commander card (max. 67x92mm). The cards compartment can also be divided by inserting up to six card dividers. Dice compartment: Under the iris lid hides a small dice tray, which can be removed to use the box as a dice tower. The lid has a clever two stage mechanism, which first releases the clicking lock before opening the actual iris leafs. This makes it possible to fully open and close the lid without any friction when used as a dice tower, but also provides the option to lock the iris leafs when the lid is rotatet back all the way to secure the dice for transport. Dice tower: When the card deck and the dice tray is removed, the door on the bottom can be pulled out, which also moves a flap inside the box to ensure, that the dice roll out of the box. The dice door also clicks in the closed position, so it will not fall out by its own. Assembly:To assemble the box, the only thing needed are two pieces of 1,75mm filament which act as the hinge of the lid and the lid flap, you can then also secure the filament pieces with a small drop of CA glue. Assembly-guide on youtube: https://youtu.be/46yPGfle0ig If you decide to print the multicolor variant (meant for single material printers), you will also need to glue the different colored pieces together. Dimensions of the assembled box:- 89x92x141mm Minimum printbed size:160x160x160mm