About this 3D model

Modular Wall Set - Ferrous Foundry Files provided with wall lengths for tile size of 4". The orcaslicer setups include: 8 color setup (only for pipes piece) for use with 2 AMS units (or equivalent) or manual color changes. Monocolor setup for use standard size FDM printers. The photos shown are from the setup provided. Matte Yellow was used for all wall sections, colors as shown on the pipe sections and individual colored doors, followed by a clear matte undercoat then hand painted/weathered. All models have been oriented to be printed supportless. The door hinges can be either magnetised with 3x2mm disk magnets (4 total, 2 per door, 2 per doorway) or as shown in the photos with a piece of 1.75mm filament. Square and Hexagonal Pillars are included to allow for more complex layouts (square shown in photos). Each Pillar has sockets (4 for square, 3 for hex) in the base for 3x2mm magnets, 1.75mm filament or 3D printed pins to allow mounting to a board or my 4" tiles (available on my store page soon). This set is intercompatible with all my other 4" Modular Wall sets for those that want to walk from their starship passenger cabin to engineering or dungeon delving in an abandoned mine at the holodeck. *Floor tiles not included in this Set, miniatures shown for scale.