About this 3D model

For all Bambu Studio users or anyone who can use a 3mf file I recommend using the attached 3mf file. For anyone who cannot use a 3mf file all of the stl files are located in the zip file attached. ALL of these designs are printed with NO supports & NO Brim. Please ensure you have proper bed adhesion for all of your models. I use a Textured Build Plate with Bambu Labs liquid glue. All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mm (Maximum) layer height. I use the 4 Color AMS system to print the models in color. FILAMENTS IN PHOTO ABOVE: Bean Bitten: Stronghero3D Silk Gold and Galaxy Red pla - https://a.co/d/85DBqwu Bean Worm: Stronghero3D Summer Green pla - https://a.co/d/7GQ2mvd Please Note: I tried something a little different with these Zombeans models. These are an All-In-One Model Keychain/Magnet. Currently the 3mf file is setup to pause at layer 24, when printing at a 0.16mm layer height. Once the printer pauses, simple place (1) 8x3mm magnet into each hole and then press resume on the printer. The printer will print directly over top of the magnets concealing the magnets inside and turning these zombeans into little magnets. The magnets can be purchased from Amazon... https://a.co/d/1bVKYKB If you don't want the magnets simply remove the pause from the slicer. (How To Remove The Pause From The Slicer: After the plate is sliced you will see a green vertical slider all the way on the right side of the screen and a red pause located at layer 24. Click on the pause, then right click and select Delete Pause) Slice again and Print! The Cans are Stackable and have a threaded lid. Please let me know if you have any questions. Thank you!