About this 3D model

Meet Nova — a bold gamer cat from the future! This modular 3D model blends style, motion, and arcade vibes into one fun urban figure. The set includes: Nova, a fearless cyber-cat character in a yellow tech-coat with bold buttons, a bright red skirt, and a flame-shaped hairstyle. Her sporty headband and confident look make it clear — she’s built for speed, style, and adventure. A game controller — her favorite weapon in the battle for pixelated glory. A futuristic hoverboard — not just for show, but for seamless jumps between levels and dimensions. It features a magnetic foot-to-board connection, allowing Nova to stand firmly in place while still being easy to detach for dynamic posing and play. Each piece is easy to print and assemble. The arms are poseable, allowing Nova to hold accessories.This is a modular, assembly-friendly model. It can be printed without an AMS system on a small home printer. The model is fully detachable, prints quickly, and is easy to assemble. Some parts snap together, while others require a small amount of glue. The Cat’s feet and Hoverboard include built-in slots for magnets - you only need to pause printing, put magnets and continue printing. Nova Cyber Cat is compatible with other Rumi Blocks Sets! Forest Rumi Blocks Series:Forest Set with Fox Forest Set with Raccoon Forest Set with Bear The Rumi Crew:Bull-Traveler Taggy Funky Street Pig Steampunk Fixie the Fox Other Stackable & Fidget Rumi Sets:Fidget Sensory Blocks Set Stackable Parrot Fidget Toy The ZIP file contains STL and 3MF files, including prepared files for AMS color printing, single-color printing, and a 3MF file with all the parts for printing the colorful Cat in a disassembled state for assembly. The model is for private use only. Reselling, sharing, or distributing the files is not allowed. Key Features Cyber Cat Character – includes modular parts: Cat figure with jacket, flame-style hair, hoverboard, game controller, and accessories Interactive and Poseable – rotating arms can hold accessories like the controller or hoverboard for dynamic play and display Hidden Storage – hollow body lets you stash small items inside Modular & Stackable – fully compatible with my other Rumi Blocks sets: mix and match hats, accessories, and bodies Easy to Print: fully detachable, quick to print, and simple to assemble. Quick Assembly – some parts snap together, others need a drop of glue Follow me on instagram @rumirumi_3d, tiktok @rumi.rumi.3d, Vkontakte https://vk.com/rumirumi_3d and telegram https://t.me/rumirumi_3d Dimensions- Cat Height: ~105 mm- Inner Storage: ~65 mm height, 21 mm diameter- Hoverboard: 75 mm long, 30mm wide- Controller: ~30 mm wideIn general, you can scale these toys up or down to your liking. Just keep in mind that significantly reducing or increasing the size may affect the fit of the connections. I recommend printing them in their original sizes or staying within a range of ±20% from the original size. 3D printing settingsPrinter: Bambu A1 miniMaterial: PLA (I used PLA by Bambu Labs)Support: noneNozzle size: 0.4 mmLine width: 0.4 mmLayer height: 0.2 mmOuter walls: 2Infill: 15%Slicer: Bambu Studio Technical NoteAfter printing you’ll need to gently rotate each arm with a bit of pressure. Just make sure to wait until the model has cooled down a bit. You’ll likely hear a soft cracking sound—it’s nothing to worry about! This is a small support ledge breaking off, which helped the arms print properly. This ledge also provides slight resistance when rotating the arms, making them more stable, which is a bonus. How to Insert Magnets into the ModelYou’ll need 4 neodymium magnets, size 5×2 mm, for assembly.Important: Make sure to match the polarity — the magnets should attract, not repel!To embed magnets inside the model during printing, you’ll need to pause the print at the right moment — just before the cavity closes from the top. Here’s how to do it:1. Open the model in your slicer (e.g. Bambu Studio).2. Locate the last layer of the magnet cavity, just before the top is bridged over. If your layer height is 0.2 mm: In the legs, this is layer 15 In the hoverboard, it’s layer 143. Add a pause at the correct layer in your slicer: In Bambu Studio: go to Preview mode → right-click on the layer → Add Pause Print Pauses are already included in the provided .3mf file, but please double-check that they are active before printing.4. During printing, the printer will pause and move the toolhead aside automatically.5. Carefully insert the magnets into the cavities using your fingers or tweezers. ? Be sure to check the polarity! It’s best to pre-stack your magnets in matching pairs to verify the correct orientation.6. Resume the print from your printer’s screen.