About this 3D model

The latest 3DRC vehicle! It's a small, reasonably easy to print drift car with a realistic body. https://www.youtube.com/watch?v=S7eIB1OpTlw All parts (except tyres) can be printed in PLA. I used rigid.ink flexi PLA for the tyres but any flexible filament can be used. Printed in high quality rigid.ink filament - see their filament range and comparison here: https://rigid.ink/pages/filament-comparison-guide Features: All wheel drive-makes drifting fun and easy Simple, durable construction Realistic body inspired by the Nissan 240sx Drivetrain runs on ball bearings Extra parts: M3 bolts and 3mm shaft (listed in assembly guide) 1304 outrunner motor (I used this one: https://hobbyking.com/enus/3100kv.html but any with a similar kv should work) 10 amp brushless car esc 4.4g servo (https://hobbyking.com/enus/turnigytm-tgy-1440a-analog-servo-v2-0-8kg-0-10sec-4-4g.html) Small (350ish mAh) 2s LiPo battery - fits in rear bumper 2ch radio system (2.4ghz recommended) I can print any part of this for a small fee - PM me if you need part of it printing and can't do it yourself. Vote here on what to make next: http://www.strawpoll.me/14947301 (or message me if you have any other interesting ideas)