About this 3D model

K2 Spool Holder Behold, a K2 Spool Holder - a "Heavy Duty" tabletop 1KG and a 2.5KG filament spool holder. A K2 Clip "Heavy Duty" Desktop Spool holder/feeder, designed to be connected with 1/2" EMT Conduit. It's scalable, using longer rods, you can build this to be narrow or wide to hold multiple spools. This is not a simple print in place holder, you can already find dozens of those, I wanted to create something different, something very sturdy. I have also added a snap-on filament guide / bowden tube feeder, and optional end caps to accent and express your own flair. As an after thought, I did add the option for you to print your own "conduit" rods. FYI, conduit is what the cool kids are using. If you like this project, please don't forget to ❤ Like and ★ Rate! Light Grey Dark Grey/Black Orange Main Supports 3D Printed Rods - TOP rod should be scaled longer or ½" EMT Conduit Finishing touches. Design for 3D Printed Rods and different design for Conduit . Printed Conduit Default Sizes: 1x TOP = 160mm 2x Bottoms = 125mm My Print Settings: 0.28mm Layer height (for added strength, .2mm works great too) 15% infill for Main supports 80% infil for printed rods Conduit Length? I cut all 3 pieces of EMT conduit at 145mm length. You could go a smaller (like the 3D Printed Rod at 125mm) for a tighter fit, but it's nice to have the wiggle room.