About this 3D model

In the comments of my Low Poly Unicorn on Printables (also published here ) I noticed that your kids love it. So I made a painted unicorn , which is primary for the girls. So I needed to make something for the boys. Here it is. You need 4 filaments to print/paint this 2D tiger: black , red , yellow and white . You just have to swap the filament 3 times , so no AMS or MMU required. I used Bambu Lab Filament, but other brands will work, too. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 4 Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #29 (2.4mm) swap to White for the rest. Generated using the HueForge software! See videos with instructions for filament swaps with Bambu Studio and PrusaSlicer … … or try the included .3mf file! I originally posted this model at Printables.