About this 3D model

You need 4 filaments to print/paint: black , orange , yellow and white . You just have to swap the filament 3 times , so no AMS or MMU required. I used Bambu Lab Filament, but other brands will work, too. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 4 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Orange At layer #24 (2mm) swap to Yellow At layer #28 (2.32mm) swap to White for the rest. Generated using the HueForge software! See videos with instructions for filament swaps with Bambu Studio and PrusaSlicer … … or try the included .3mf file.