About this 3D model

Exo lamp is a 3D printed table lamp that doesn't need to be assembled.To use Exolamp just print it, wire it and turn on the light.The project is born for big bulb holder (E27, diameter of the casing: 39 mm, dimensions: 392.34 mm x 290 mm x 666.55 mm), but is available also for more little bulb holders (E14, diameter of the casing: 27.8 mm, dimensions: 279.67 mm x 206.72 mm x 475.13 mm). If you want to use a different bulb holder, just scale the model.The bulb holder can be easily fixed to Exo lamp with one or two little screws in the space between the bulb holder and its casing, Exo lamp can be wired by inserting the cables in the tunnel expressly created inside its body from the bulb holder to the back of its the base.In the pics can be found the prototype I printed with my desktop printer (1:10 scale), I also added an example of I wired it with a green led.