About this 3D model

Landing wheel for Conscendo Evolution. Plane has a plastic skid, landing on a hard surface wears it out pretty fast, so I designed this replacement. It takes the place of the stock skid. I am pretty sure that the same skid is used on the Conscendo Advanced also. I intend to print one and try it on the Advanced. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: .16 or .2 Infill: 20 Filament: Overture PLA and TPU White Notes: I included a screen grab of my support setting for the skid. It is printed at .16 layer height. The settings listed work pretty well on my Ender 3 pro, print the skid oriented so that the 4 pegs are on the build plate. Print with a Brim. The two wheel pieces are joined with a 3mm x 6 screw. It should self tap into the other half of the wheel. The wheel can be printed at .2 mm layer height. A 3mm x 30mm bolt is used for the axle, using a jam nut. The TPU wheel was printed on my Creality CR-6 w/Direct Drive. Category: R/C Vehicles