About this 3D model

Here's a basic enclosure that you can build using a couple of IKEA Lack tables for your Rostock Max v2 or similar Delta printer. It makes a huge difference when printing ABS or PETG and as a big benefit, significantly reduces the noise of your printer. You'll need to print the following parts: 4x Extension Upper 4x Extension Lower 2x Hinge part 1 2x Hinge part 2 2x Backing 2x Clasp 1x Bottom Catch In addition, you'll need to buy the following parts: 2x IKEA Lack tables 4x 100cm x 50cm sheets of acrylic, glass or similar see through material. (Note, you only really need one see through piece for the front, it depends where you're going to place it) 4x 100cm x 2.5cm x 2.5cm L shaped corner pieces (just to make it look a little nicer) Screws and M4 nuts/bolts for fixing Apart from a 3d printer, necessary tools are a drill, spanner and a hole cutting tool to make a hole at the back for the wires to enter. Hope you find this useful.... let me know if I can help & please please please post a made one!!! Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX v2 Rafts: Doesn't Matter Supports: No Resolution: 0.25 Infill: 33% Category: 3D Printer Accessories