About this 3D model

This model is a small power junction/switch box for the Bambu Lab x1c/p1s that provides power and switches for printer mods like a LED strip and/or Bento Box filter. This unit uses the XY-3606 pcb module, which is a voltage buck converter. It has a 12v bypass, 5v out, and a powered USB port. I power this unit with a very basic 12v 5a power brick, with the standard 12v barrel plug. They typically come in the same design as a laptop charger, but you can also find wall/socket mount versions if you want to save space. Materials: 12v 5a Power Brick - make sure this is UL listed or tested in some other way (~$10) XY-3606 Voltage Buck Converter - can find on Amazon or Aliexpress (~$2-5) DC rocker switches (2) - cheap, standard rocker switches (~$1) Double-sided foam tape Double-sided high temp foam tape M3 brass inserts (4) M3 panhead hex screws (4) Electronic Solder Heat-shrink cable wrap Tools: Soldering iron Desoldering Device/Braided Desolder Wire cutters/strippers Small/Needle Nose Pliers Side Cutters/Knippers M3 Hex key Scissors Please download and use the Instructions PDF while assembling and installing this Mod Power Box, it has detailed steps and photos of the process!