About this 3D model

As it is, it holds 40 filament samples. If you want a smaller box, place it in your slicer with the latching part in the bed and cut it where needed. For 1 slide, the cut height is 7.60mm and 3.80mm for every slide requiered. For instance, a 10 slide box needs to be cut at 41.80mm (7.60 (1) + 9 * 3.80). **It is designed to be printed with a 0.4mm nozzle. As spiral mode hollows the object, printing it with different size nozzles to the one it was disegned for, will affect the tolerances. Since they aren't tight, printing it with a 0.6 nozzle might work but I haven't tested it.