About this 3D model

A quick and simple print for the Converse sneakerheads out there! Three filament colours (2 swaps). Note: You do not need an AMS to print this! Download the STL, and add a pause at the correct layer so that you can load in a new filament spool, and then resume the print! An AMS does really help, however! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: - PLA Kingroon Black Transmission Distance: 0.4 - PLA+ eSun Grey Transmission Distance: 1.4 - PLA Kingroon White Transmission Distance: 8 Swap Instructions: - Start with Black - At layer #9 (0.84mm) swap to Grey - At layer #17 (1.48mm) swap to White for the rest.