About this 3D model

Flag, AR-15, and The 2nd. Amendment Shall not be infringed… A little patriotic Themed Hueforge print. :) Enjoy this is a 4 color, but changes back a few times to get the effect that I wanted, pretty easy to do with and AMS. I would recommend using a darker blue, but I didn't have one available at the time of printing. See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Sky Blue Transmission Distance: 8.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #3 (0.32mm) swap to Sky Blue At layer #5 (0.48mm) swap to Red At layer #8 (0.72mm) swap to Black At layer #14 (1.2mm) swap to White At layer #19 (1.6mm) swap to Black At layer #21 (1.76mm) swap to White for the rest.