About this 3D model

Summary after a lot of wishes we present the new smaller Test your 3D printer! version 2 . new version 3 here: https://makerworld.com/en/models/54359#profileId-56081 new features saving 75% volume compared to version 1 only 2.52cm3. (Version 1, 2mm baseplate: 3.16cm3) optimized 3D print font higher resolution wall thickness this version is for 0.48mm extrusion width (more to come) This is a hard to print testfile! often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff. does your printer challenge this ultimative part? check it out and get (almost) instant results. these test are included in this very tiny file: size: the object is 2x50x30mm (baseplate) hole size: 3 holes (3/4/5mm) Nut size: M4 Nut should fit perfectly fine details: pyramide, cone, all numbers rounded print: wave, half sphere minimum distance & walls: 0.1/0.2/0.3/0.4/0.5/0.6/0.7mm overhang: 25°/30°/35°/40°/45° bridge print: 2/4/8/16/mm surface: all the flat parts version 1 Instructions infill: 33% infill or similar extrusion width: 0.48mm layerheight: 0.1mm print time: about 30 minutes, depending on your printer & settings raft: you can use a raft creation by ctrlV at Test your 3D printer! v2