About this 3D model

Summary more Tests in the new Test your 3D printer! version 3 . new features Z-Height Check Warp Check Spike Hole in wall Raft Test more Overhang Steps 50° - 70° (needs special care, like cooling) 2 different extrusion widths: 0.48mm & 0.4mm This is a hard to print testfile! often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff. does your printer challenge this ultimative part? check it out and get (almost) instant results. these test are included in this very tiny file: 01 Nut, Size M4 Nut should fit perfectly 02 Wave, rounded print 03 Star, Sharp Edges 04 Name, Complex Shapes 05 Holes, Size 3, 4, 5 mm 06 minimal Distance: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm 07 Z height: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1 mm 08 Wall Thickness: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm 09 Bridge Print: 2, 4, 8, 16 mm 10 Sphere, Rounded Print 4.8mm height 11 Sphere Mix, 7 mm height 12 Pyramide, 7 mm height 13 Overhang: 25, 30, 35, 40, 45, 50, 55, 60, 65, 70° 14 Warp, does it bend? 15 3D Print Font, optimized for 3D printing 16 Surface, Flatness 17 Size, 100 x 100mm x 23.83 (10mm width) 18 Spike, minimum Layer Time, 21 mm height from Bottom (include Baseplate) 19 Hole in Wall, 4 mm diameter, check for proper print 20 Raft Test, raft should be just under the model 21 Retract Travel, check retract settings for longer travel version 1 https://makerworld.com/en/models/54346#profileId-56059 version 2 https://makerworld.com/en/models/54351#profileId-56064 Print Settings Rafts: optional Supports: No Resolution: 0.1mm or higher Infill: 30% creation by ctrlV at Test your 3D printer! v3