About this 3D model

Remix of PaulDirac314's case https://www.printables.com/model/592736-iphone-15-pro-max-minimalist-case. Adding a credit card pouch at the back, plus adding a lip at the front so that print stays put when printed in TPU. As the TPU has a 90 degree overhang and I wanted to print it on a Bambu Lab X1c - with PLA support - I actually designed a PLA insert that needs to be inserted into the print when it is a layer 50. The PLA support part can then be easily removed after the printing is complete. NB/ This version is not compatible with MagSafe chargers or mounts. I will probably make another version with the credit card part not included or detachable. 3mf files included will only work with Bambu Studio or Orca Slicer. Instructions Print PLA support section in PLA Slice TPU section at 0.2mm layer height and include a pause a the beginning of layer 50 Start the TPU print Insert the PLA section - which should slot into the holes at the side - feel it with finger to check that the top is the same height as the TPU print Restart the print Remove print and gently pull the overlapped TPU off of the the top of the PLA support section, remove the PLA section and discard (or use for another print).