About this 3D model

Before starting this project, I want you to know that there are two versions: this simpler one, without backlight on the logo and icons, and another more complete version with all the features. Light Flood X1 and P1 Printers - Exclusive Version – Now available on MakerWorld for all of you! Introduction As has happened in some of my prior designs, I don't like to limit my work only to functional objects, I always try to have them serve as a way to learn something new. With this project, you will have the opportunity to experiment with various printing techniques. Although it is a project with some challenges, it can be interesting and informative for users of all levels of experience. Beginners and intermediate users are the ones who are most likely to acquire new knowledge, thereby taking your printer's capabilities to greater levels. Just a side note, if you permit me, for some reason people ask me what CAD software I use to design most of my projects. So here is a time-lapse of the design work on this model being done: What to expect from this module for the X1 and P1 models from Bambu lab: This module was developed to offer a solution that diverges from what already exists, by aggregating some ideas that I consider to be interesting and trying to improve them. Without trying to detract from the merits of the different solutions that already exist, here is what I propose: Install a bright, softly diffused light at the central core of the printer. In contrast to LED strips, this light will more effectively illuminate the printer's interior. This aspect is something Bambu Labs ought to enhance in future versions of their enclosed printers. At present, the lighting in the unit isn't consistently powerful enough for effective visual monitoring of the printing process. Convection ventilation of the printer. There are already several solutions that solve this issue and that are certainly simpler, however this feature ended up presenting itself as something that could be easily added to this project. Again, in the case of closed printers, it may happen that their internal temperature may be higher than is desirable, especially in the case of materials with a lower glass transition temperature, as is the case with PLA. Although the printer has intake ventilation, it may not be enough, especially when the front door is closed, in these cases, the extra ventilation can be very helpful. Some information about the materials. What is Glass Transition Temperature . Raising the height of the top glass cover addresses another issue, particularly concerning the section of the PTFE pipe that connects directly to the extruder. Some users have noted that when the pipe rubs against the glass top, it can lead to early wear and tear, and potentially even clogs in the extruder, especially if the tube bends near it. Therefore, in designing the space for the central light, I factored in this issue and increased the clearance slightly more than the existing setup. If you choose the version without the central light, you'll gain an additional clearance of about 70mm above the original height. Influence on the inbuilt camera exposure compensation Printing Details: In terms of printing, what differentiates this project are two points: The use of a different material in the support structures in some of the major parts Print Speed Use of translucent materials (not necessarily transparent) 1. The support structure’s This project resorts to the use of two materials, although they are the most common, PLA and PETG, there is a characteristic they have in common that is interesting to explore. These two materials do not adhere to each other, so we can use this combination of materials in order to create parts that need support structures without major concerns regarding the removal of the supports, as well as the finishing of the contact area between the support and the part itself. With this technique, especially for members with an automatic material feeding unit (AMS), there is no need to be afraid of using supports, they can be used without fear of removing them Additionally, they will not mar the surface finish of the part in the contact area. Dark green interface layer - completely filled and in direct contact with the part (13/12.2024) After launching this project, Bambu Lab began offering more specialized support materials, both for the entire support structure and specifically for the 2 or 3 interface layers. However, after testing, I found that nearly all of these materials react poorly with matte PLA (strong adhesion). From experience, I now understand that matte PLA tends to remain pliable for much longer, indicating that its glass transition temperature is likely lower than that of standard PLA. Interestingly, while the Heat Deflection Temperature is the same for both standard and matte PLA, the Vicat Softening Temperature is surprisingly lower for standard PLA. Despite these differences, matte PLA exhibits significantly super