About this 3D model

Adapter ring for Jayo 1.1kg cardboard spools with an outer diameter of 194.5mm to be able to use them in the AMS. The adapter ring fits tightly on the spool and it runs very well in the AMS. You can use the normal version, or the “long” version (if you want to insert some ballast). Print parameters: 0.4mm Nozzle 3 walls 0.2mm Layerhigh 15% Infill printed with Jayo PLA Matte Important: There are 2 different cardboard spools of the Jayo filament: 1 from Amazon, and 1 from Ali Express. I made 2 different rings, 1 for Ali and 1 for Amazon spools. In the photos you can see the visual differences of the two spools. Adapter ring for Jayo 1.1kg cardboard spools with an outer diameter of 194.5mm, to enable their use in the AMS. The adapter sits firmly on the spool and it runs very smoothly in the AMS. You can use the standard version, or the long version (if you wish to insert ballast). Printing parameters: 0.4mm Nozzle 3 walls 0.2mm Layer height 15% Infill printed with Jayo PLA Matte Important: There are 2 different cardboard spools of the Jayo filament: 1 from Amazon, and 1 from Ali Express. I made 2 different rings, 1 for Ali and 1 for Amazon spools. The photos display the visual differences of the two spools.