About this 3D model

The model is designed to be printed in two halves and glued together. I printed mine in ABS, but you can also use other high-temperature materials (at least PETG). Note that some PETG blends can go soft if left to cook at 70°C for long periods. Main Body and Side Clip need to be duplicated. They are symmetrical so no mirroring needed. Print Side Clip and Bottom Clip with support when printing in ABS/ASA. Otherwise, you can get away with no supports. Use cyanoacrylate glue on clips to attach the parts. CA glue may have issues sticking to PET, so you may have to apply a bit of force and let it cure longer than usual if printing with PETG. If printing in ABS/ASA, use brim to prevent warping.