About this 3D model

Hello everyone, another idea to extend your light in the Bambu Lab X1-Carbon. The built-in Led will be removed and a Led-Strip with 24V 6000K will be added to increase the brightness in your printer. The 5V output for the old LED is used as a signal, in addition you need an optocoupler module that switches the 24V LED strip on and off if you want to control the LED on your screen or cell phone. The project requires a little time and skill, as you will need to access the printer's power supply. There is an unused 24V output that you can use for your LED strip. You can see from the pictures how I laid the cable. I will be happy to give you more details if there is a demand for such a conversion. To store the optocoupler I have designed a small box that can be glued on later. Have fun with the conversion. Optocoupler Moduel https://www.amazon.de/DollaTek-Isolierung-MOS-R%C3%B6hre-Feldeffektr%C3%B6hrenmodul-Ersatzrelais/dp/B07HBL6VZ9/ref=sr_1_6?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1EIBM0X2KHJKX&keywords=optokoppler+mosfet&qid=1701440357&sprefix=optokopplermosfet%2Caps%2C103&sr=8-6 Please like, share and comment. :)