About this 3D model

LED Light Ring This light ring was designed for an LED strip that is powered by 3 AA batteries. (This is available as 1 meter for 1.50 € at Action in warm white) During assembly, the LED strip should be threaded through the holes and glued in. The ring parts A and B, after the diffuser has been inserted, must then be glued together with 2-part epoxy at the appropriate place. Only the box needs support. Otherwise, print everything normally with a 0.2 layer height. PET / PLA / ABS doesn't matter. Alternatively, the diffuser can also be printed with TPU. (but it doesn't have to be) LED light ring This light ring was designed for an LED strip that is operated with 3 AA batteries. (This is available as 1 meter for 1,50 € at Action in warm white) When assembling, the LED strip should be guided through the holes and glued in. The ring part A and B, after the diffuser has been inserted, must then be glued together with 2 superglue at the appropriate point. Only the box needs support. Otherwise print everything normally with 0.2 layer height. PET / PLA / ABS does not matter. Alternatively, the diffuser can also be printed with TPU. (but does not have to be) Translated with DeepL.com (free version)