About this 3D model

Summary FRANCAIS : Greetings to all, Here is a ~CAT engine model as a cover for the electric motor of our 1/14 scale RC truck, King Hauler model made by us in ALU (see Youtube video) If you want to see the model in action Print Settings: (as I printed it) Infill: 100% (I haven´t tested less, I´m still a beginner so less might have been enough, but hey, everyone starts somewhere ;) ) Layer height: 0.2 mm Support: YES, recommended Print time: ~7 hours PS: The details you see on the side of the cover in the photos are not included in the model, these are leftovers from my prototype that we cut from this one and then glued to the real model XD. ENGLISH: Yo, Here´s my model of a cover for our RC Truck 1/14 scale, it covers up the electric motor. Both models are with, STL and Solidworks file for modifying ;) If you want to see how it looks like: Print Info: (like I made it ) Infill 100% (maybe you can choose a lower infill, didn´t test it :) ) Layer : 0.2 mm Support : Yes ( highly recommended , but sometimes hard to cut away, did it with a dremel) Time : ~ 7 Hours Material : White ABS PS, the details you can see at the side or from my prototype model , we cut some pieces of it and glued them on the final model XD. PPS : All faults found can be taken XD All the faults you find in the text above can be kept ;) (I don´t like accents "hat" or other ...:P) Part 1: https://www.youtube.com/watch?v=O9EnzL6pj-A&index=1&list=PL2qU0Gy6gjiBZ-PRJJsKsqMpYpHiddZ7 Part 2: https://www.youtube.com/watch?v=KqMWAYo3Zxg Print Settings Printer Brand: RepRap Printer: RepRap Ord Bot Hadron Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 mm Infill: 100% Notes: ENG : You can surely use less infill %, it was my first big print , so.. FR : You can certainly print this model with less infill, but hey, it was my first big print, so... PRINTER / IMPRIMANTE : 3D MicroDelta Rework - NOT Ord Bot Hadron