About this 3D model

This model requires four 608 bearings; however, you may utilize the uploaded 3D-printed 608 bearings as an alternative. Note that 3D-printed bearings may not offer optimal smoothness and are therefore not recommended. Assembly Instructions: During assembly, first insert the support shaft from one side of the base, then install the roller with the bearings. While I have refined the roller model, installation with 3D-printed 608 bearings may still present some difficulty; patience is advised. If installation of the desiccant box and the split base proves challenging, consider adjusting the X-Y dimensional compensation parameters before printing. Note: When printing the desiccant box lid, increasing the top or bottom layer count for solid infill is recommended This model is a modification of the desiccant box model shared by Bilibili UP master “ 忙了一天的高师傅 ”.