About this 3D model

Epax E10 chamber heater case. Allows for 110V automated chamber heating for hard to print resins in your E10. Adding a heater to a 3D printer increases risk of fire, DIY at your own risk. How it works: Remove internals from Heatbud and install into printed case Use Inkbird controller to set chamber temps for stable printing conditions (currently use 27c). Can turn on/off via wifi on your phone with free app Consistent temps mean better printing with challenging resins such as Siraya Blu Completely stand-alone solution independent of E10 electronics Print Settings: 0.2mm or 0.3mm FDM PETG Filament Supports required (see snapshot of Simplify3D) Extra PartsNeeded: Honeywell Heatbud heater Inkbird C929 (or similar) temp controller M3x16 screws M3x10 screws M3 heat set inserts Modifications to E10 Minor cut / notching of orange cover to clear wires NO modification of E10 electronics