About this 3D model

You get Two different eye versions with these files. They are just like my other fruits and veggies except I imagined an Eggplant would have no teeth and a large tongue. The Tops are printed separately and snapped onto the eggplant. For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file as all the models are precolored. ALL of these designs are printed with NO supports & NO Brim. Please ensure you have proper bed adhesion for all of your models. I use a Textured Build Plate with Bambu Labs liquid glue on a clean plate. If you want to make Magnets there is a pause added into the slicer at layer 23, when printing at a 0.16mm layer height. Once the printer pauses, simple place (1) 8x3mm magnet into each hole and then press resume on the printer. The printer will print directly over top of the magnets concealing the magnets inside and turning the nuts into little magnets. The magnets can be purchased from Amazon... https://a.co/d/1bVKYKB If you are planning on making the keychains, the ball and chains fit perfectly thru the little hole... https://a.co/d/c4BRqhH All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16-0.20mm layer height. I use the 4 Color AMS system to print the models in color. Please let me know if you have any questions. Thank you! Mike