About this 3D model

Simple Bracket to install a webcam on the Prusa Mini. WebCam Model: Microsoft LifeCam HD-3000 Its purpose is to offer a clear view of the nozzle and layers. Here's an example of what you could see during printing. Because the Cam is attached to the Z axis, it will layer by layer follow the nozzle throughout the print process. To be assembled you can follow two ways: Method 1: With Screw and Knurled Nut (Preferred) Material needed: 1 x M3x25 screw 1 x M3xL5xD4 Knurled Nut The knurled nut will be put into the Cam Clamp 's smaller hole, and the clamp will be secured to the motor bracket with the M3x25 screw. Method 2: Using a screw that is directly inserted into the clamp Material needed: 1 x M4x25 screw The screw will pass through the larger hole and thread on the clamp's opposite smaller hole, fastening the cam clamp to the motor bracket.