About this 3D model

A workshop 'Bits Box' including dividers. Great for 3D printing tools/waste filament bin. Fixes to most worktops/desks with 2 sturdy G-clamps. Easy to move around or empty into a bin. I have also included an angled version so that the rear edge will sit below the work surface, making it easy to scrape things into it with your hand. Print Settings: If you can afford the material, print with 100% infill. If not, a Minimum of: 30% Cubic infill. 3 perimeters. 4 Top and bottom layers. Use a brim to avoid warping. 0.25mm layer height or less. Your choice of nozzle. (finer nozzles and smaller layer heights will allow for more detail in the debossed designs) Other Pieces: Print the screw, G-clamp end, and dividers with 100% infill. Print the dividers flat on the build plate. Print the screw vertically, with the 'Z-3D' touching the build plate and use a brim. Thanks for looking :) - Please rate and review the model, and don't forget to post your makes! :P