About this 3D model

Smaller can dispenser that fits into small camping refrigerators (Dometic) There are two folders, one contains individual parts that can be printed flat and then assembled with a few M2x12mm hex screws, the other folder contains a file that can be printed in one piece with few support structures The current design should fit common European 330ml cans with 66x115mm, if it should fit US cans, simply scale up by about 10%. Also note the screenshot on how to access the hidden folders for the different models on MakerWorld. Update 11/28/2025: The 0.5l can variant has been widened to 17.3cm inner dimension, as I made a mistake in the dimensions and never tested it myself. Thanks to @florian.keim198 for the info! Update 02/12/2025: I have uploaded a new wider model for 0.5 liter cans. I haven't tested it myself yet, but 17cm high cans should fit. Perhaps do a quick test print with a small cropped area before printing to verify the width for 0.5 liter cans Update 06/11/2023: I have now tested it and made a few minor changes. Nothing groundbreaking and it's not worth printing again if you've already printed the first version. I have also uploaded another version that has side walls to slightly improve the falling of the cans Currently, I am only adapting the one-piece version, as there isn't enough time to adapt both