About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA ENVLAS Black Transmission Distance: 0.3 PLA ENVLAS Red Transmission Distance: 1.5 PLA ENVLAS BL/GRN/RED Transmission Distance: 1.5 PLA ENVLAS Grey Transmission Distance: 2 PLA ENVLAS Grey Transmission Distance: 2 PLA ENVLAS Yellow Transmission Distance: 5 PLA ENVLAS BL/GRN/RED Transmission Distance: 1.5 PLA ENVLAS Grey Transmission Distance: 2 PLA ENVLAS BL/GRN/RED (Tri-Color) Transmission Distance: 1.5 PLA ENVLAS Marble Transmission Distance: 5 Swap Instructions: Black until layer #6 at 0.56mm Red until layer #7 at 0.64mm BL/GRN/RED (Tri-Color) until layer #8 at 0.72mm Grey until layer #9 at 0.8mm Grey until layer #11 at 0.96mm Yellow until layer #12 at 1.04mm BL/GRN/RED (Tri-Color) until layer #13 at 1.12mm Grey until layer #15 at 1.28mm BL/GRN/RED (Tri-Color) until layer #18 at 1.52mm Marble for the rest.