About this 3D model

Hueforge generated file printed on Bambu Lab X1C. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA ENVLAS Black Transmission Distance: 0.3 PLA ENVLAS Yellow Transmission Distance: 5 PLA ENVLAS Yellow Transmission Distance: 5 PLA ENVLAS Red Transmission Distance: 1.5 PLA ENVLAS Yellow Transmission Distance: 5 PLA ENVLAS Grey Transmission Distance: 2 PLA ENVLAS BL/GRN/RED Transmission Distance: 1.5 PLA ENVLAS Yellow Transmission Distance: 5 PLA ENVLAS Marble Transmission Distance: 5 Swap Instructions: Black until layer #5 at 0.48mm Yellow until layer #6 at 0.56mm Yellow until layer #7 at 0.64mm Red until layer #8 at 0.72mm Yellow until layer #9 at 0.8mm Grey until layer #11 at 0.96mm BL/GRN/RED(tricolor) until layer #14 at 1.2mm Yellow until layer #16 at 1.36mm Marble for the rest.