About this 3D model

This macropad is a great introduction into programming and soldering. Follow the guide on https://www.tomshardware.com/how-to/raspberry-pi-pico-powered-stream-deck to for example wiring and software. Sample code has been provided - in the link above. Keycodes can be found here: https://circuitpython.readthedocs.io/projects/hid/en/latest/_modules/adafruit_hid/keycode.htmlI've also uploaded the Fusion 360 file so that you can make any changes you'd like to. Parts List: -18 cherry style mechanical key switches-raspberry pi pico-wires-no glue or screws required! all parts friction fit together Assembly: -Print keycaps, frame, and switch plate-snap all switches into the plate-solder a common wire between one pin on each switch-solder a wire between the 3v3 pin on the pico and the power bus on the key matrix-solder the remaining pins of the switches to an individual gp pin on the pico (I've used gp0-17, but you can use any - just change it in the code)-snap the pico onto the standoffs in the frame-slide the switch plate into the frame