About this 3D model

This is a simple round picture frame, about 245 mm (9,64 in) in diameter, with 3 interchangeable motifs depicting monsters. All designed in HueForge. Printing instructions Frame: Nothing special, I printed mine with variable layer height, but 0.2 or 0.16 works as well. Motifs You can download the motifs by clicking on “RAW model files” and selecting the motif of your choice. The files are rather large 3MF files. I used PETG, because I had that at hand. You will need black, grey, natural white and white for best results. Screaming Ghoul Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG PolyLite Black Transmission Distance: 0.3 PETG Eryone Grey Transmission Distance: 3.4 PETG BambuLab Basics Nature Transmission Distance: 8 PETG BambuLab Basics White Transmission Distance: 3.5 Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Grey At layer #16 (1.36mm) swap to Nature At layer #27 (2.24mm) swap to White for the rest. Werewolf Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG PolyLite Black Transmission Distance: 0.3 PETG Eryone Grey Transmission Distance: 6 PETG BambuLab Basics Nature Transmission Distance: 8 PETG BambuLab Basics White Transmission Distance: 3.5 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Grey At layer #15 (1.28mm) swap to Nature At layer #23 (1.92mm) swap to White for the rest. Sharp teeth Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG PolyLite Black Transmission Distance: 0.3 PETG Eryone Grey Transmission Distance: 6 PETG BambuLab Basics Nature Transmission Distance: 8 PETG BambuLab Basics White Transmission Distance: 5.2 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Grey At layer #17 (1.44mm) swap to Nature At layer #27 (2.24mm) swap to White for the rest.