About this 3D model

This is an optional part for the Main Rotor Head (MRH) uploaded earlier. See the URL below.https://www.myminifactory.com/object/3d-print-main-rotor-head-for-helicopter-fully-articulated-type-75364The purpose of this part is to prevent the MRH from slipping down relative to the pipe. Assembly Information- See photo and image Download files includes;- files: MRH-Stopper01.stl Purchase Parts Information;- Micro screws M1.4x6L - 4 ea Total Net Print Time: Approx. 16 min.- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When at actual print, each parameter may be adjusted by your experience. 3D printing settings No Raft and Supportis required. Layer Height, Infill: Depending on your experience. I printed by "idbox" using with 0.4 nozzle, 1.75 PLA.