About this 3D model

Printable replacement filament cutter blades for X1 and P1 Bambu Labs printers. Use #4 hobby blades, I used these from Amazon (https://www.amazon.com/TIHOOD-100PCS-Replacement-Hobby-Blades/dp/B07QP8L1QG). The blades need to be snapped to ~12mm in length. I created a small printable jig to allow easily snapping them to the correct length with the help of a pair of pliers. Please provide feedback if you give this a try. I am only one person with one machine, but I have tested with 1000+ filament changes and encountered no issues. All feedback is welcome. Print Settings: I recommend printing out of a material such as PETG, ABS, or ASA. I used ASA. PLA may work but I have not tested it so try at your own risk. 0.12mm layer height highly recommended as it makes supports unneeded. Use Arachne wall generation to ensure dimensions are preserved, I had issues when printing with classic wall generation. 3 walls, 100% infill. Brim may be needed due to small contact area with the build plate. Post Printing: If you used a brim ensure to trim any access so the cutter will properly fit. Once you have your blades cut to length they can be inserted and secured using your glue of choice or by heat insetting. I found Gorilla brand super glue was effective. Insert into cutter arm as normal ensuring it actuates smoothly. If it does not you may need to lightly sand the print. I have attached STL and STEP files as well as my ASA Bambu Studio project.